Custom printed cups
Build a coordinated cup program for beverage brands, importers, distributors and foodservice suppliers. Select the PET or PLA cup, size, lid, printing and carton specification together, then carry the approved artwork and sample reference through bulk production and repeat orders.
Custom Printing Process
Bioleader Cups coordinates cup forming, lid selection, custom printing and export packing around the approved cup specification.
Sheet extrusion and thermoforming, with dimensional checks for the selected SKU.
Cup-body artwork reviewed for the selected product and printing arrangement.
Position and color checked against the approved design and sample reference.
Cup-and-lid checks, carton identification and export packing kept connected.
An existing cup with printed artwork and a new cup structure involve different development decisions. Choose the route before finalizing design or delivery plans.
Do not approve a new structure on the assumption that a standard cup's MOQ, artwork template or lead time will apply.
These existing models are starting points for artwork review. Capacities and rim dimensions below belong to the named SKU, rather than every variant on its product page.
JZ-12oz-90Iced coffee, juice and takeaway cold drinks.
View Product Specifications
JZ-16oz-90Iced coffee, smoothies and branded beverage service.
View Product Specifications
PET-20oz-90Bubble tea, fruit tea and larger cold drinks.
View Product Specifications
PLA-12-90Juice and cold beverage programs specifying PLA.
View Product Specifications
PLA-16-90Cold brew, smoothies and printed PLA cup programs.
View Product Specifications
PLA-20-90Larger chilled drinks and foodservice PLA programs.
View Product SpecificationsA shared nominal rim diameter does not prove lid compatibility or a shared printing template. Confirm the cup and lid specifications, then test the selected physical combination.
Choose the material for the complete cold-drink packaging system. Clear cup walls make the drink part of the printed design.
Both ranges shown here are for cold use. PET is not compostable. PLA compostability claims depend on the specific product, applicable documentation and suitable commercial composting conditions; they do not imply home compostability or universal local acceptance.
Final printing arrangements depend on the selected model, design and order structure.
Send the SKU, material, capacity and intended lid. Cup height, taper, circumference and print zone can differ even when two cups share a 90mm rim. A template for one model must not be assumed suitable for another.
Use the printed cup for a clear customer action: a menu, loyalty page, product launch or seasonal offer. Align design versions, quantities and destination dates with the purchasing plan.
Select the cup, approve the design and record the physical checks needed before production release.
Choose PET or PLA, capacity, dimensions and the actual SKU. Select the lid and verify seating, retention and intended use; diameter alone is not approval.
Confirm the SKU-specific print area, logo, artwork revision, colors and QR / functional elements. Resolve file and layout questions before sampling.
Confirm the file and layout: artwork position, text legibility and color references. A flat proof does not approve the result on a tapered cup.
Where required, check lid fit, printed color, opacity and artwork placement against the actual drink. Test QR / functional elements with representative phones, distances, lighting and condensation; verify the destination.
Record corrections and approve the artwork, cup-and-lid specification and physical sample where required. Retain the agreed production reference.
Confirm quantity, carton identification, private-label and export packing requirements and all approvals before release. Use the approved reference for production QC and reorders.
Plan quantities by cup size and artwork design, rather than only the total order volume.
20,000+
Standard MOQ starts from 20,000 pcs per size.
30,000+
Standard MOQ starts from 30,000 pcs per size/design.
Custom
Separate technical evaluation and project-specific MOQ.
Smaller trial request. Subject to specification, production scheduling and quotation; a higher unit price may apply. Acceptance is not guaranteed.
Sampling arrangements, any setup or tooling charges, production lead time and shipping schedule must be confirmed for the selected SKU, artwork, quantity and packing. A required delivery date should be included in the inquiry; it is not a confirmed production slot.
A project review connects the product choice to the commercial and approval requirements. Identify open decisions rather than leaving them implicit.
Keep product, design and packing references connected so later orders can be checked against the same approved specification.
Confirm the cup SKU, dimensions, lid specification, artwork revision, color reference and agreed sample. Resolve deviations before release.
Check print position and appearance against the approved reference. Review cup dimensions, applicable lid fit, carton quantity, shipping marks and packing requirements.
Reference the approved artwork version, cup and lid models, packing specification and previous approval. Review any design, material, model or destination requirement change before repeating the order.
Use these four guides to prepare the specification and approval questions for your order.
Bring artwork, lids, quantity and order approval into one purchase plan.
Prepare editable files, color references and model-specific artwork.
Decide what each sample needs to verify before production.
Check the actual combination instead of choosing by capacity alone.
Standard MOQ starts from 20,000 pcs per size for plain cups and 30,000 pcs per size/design for custom printed cups. Smaller trial requests are subject to specification, production scheduling and quotation; a higher unit price may apply. New molds and special structures require separate technical evaluation and project-specific MOQ.
Custom printing can be reviewed for selected PET and PLA cup models. Confirm the actual SKU, artwork, quantity and applicable printing arrangement before approval.
Flat lids, dome lids and applicable drinking lids can be reviewed with the cup. Select by the actual cup and lid specifications, then verify physical fit before production approval.
Provide AI, editable PDF or EPS artwork where available, together with the cup SKU and color references. SVG may be a vector source; JPG and PNG are visual references. Request the model-specific template before final layout.
Special dimensions, structures, colors or new molds are subject to technical feasibility review. Tooling, samples, project-specific MOQ and timing must be confirmed for the proposed development.
Carton identification, shipping marks, private-label requirements and repeat-order packing specifications can be reviewed as part of the project. Confirm the final packing details in the order specification.
Share the cup, lid, design, quantity and destination. We will review the specification, identify open decisions and prepare the next steps for quotation and approval.